Your floors need special protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different occasions beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so to make informed selections on the most effective product to make use of on your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These include widespread adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).
(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as four ft by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces however doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often go away adhesive residue when removed. Widespread paper protection products embody:
· Ramboard™ A coated compressed paper board 38 mils thick that’s breathable, water resistant and made from recycled paper.
· Kraft paper is a lightweight brown paper that is inexpensive however does not afford any impact protection and might simply tear
· Scrim paper could incorporate coatings or reinforcements to make them waterproof as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper however they are also too thin to offer much impact protection.
· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper can even rip easily so it not usually beneficial for use
· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nonetheless it just isn’t coated with a water resistant end and ought to be kept dry at all times in order that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films various from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping in order that they should not be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films do not offer any impact protection and are normally rated for short term use of 30 to ninety days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor selection in maintainable protection. Protection films are available in a wide range of adhesion “tack”. Hard surface protection films may have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard dimension of 4 ft by 8 ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/four inch thick. Plywood is commonly 1/four inch to three/4 inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they are bulky to hold and store. These wood sheets ought to be used on prime of a softer protection reminiscent of a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not offer moisture protection and will be harder to chop to measurement than different protection types.